acrylic

Beta Dent acrylics are always available in the market under the Acrosun brand

acrylic

Beta Dent acrylics are always available in the market under the Acrosun brand

Self-Cure Acrylic (Instant)

Self-curing acrylic powder is produced from high molecular weight Methyl Methacrylate in polymer chain structure and particle size below 60 microns. The primer and stabilizer are added to the powder composition and the catalyst is added to monomer composition to perform a chemical reaction between the powder and the liquid. The ratio of combination is 5 grams of monomer to 10 grams of powder

Tray Acrylic

Tray acrylic powder is based on Methyl Methacrylate polymer with combination of mineral materials and peroxide. The monomer has an additive of primer and organic oil to prevent more adhesion to the gypsum cast as well as ease during forming . Tray Acrylic is self-cure and use with the ratio of 5 grams of liquid to 10 grams of powder

Heat Cure Acrylic

The chemical structure of heat cure acrylic is based on Methyl Methacrylate polymer and is produced by adding peroxide and stabilizer to powder with a particle size of 10 to 100 microns. In the combination of Methyl Methacrylate, anti-bubble and cross-linked are added to increase the quality of the made prosthesis

Tooth Color Acrylic (heat cure)

The chemical structure of baked acrylic is based on methyl methacrylate polymer and is produced by adding peroxide and stabilizer to powder with a particle size of 10 to 100 microns. In the combination of methyl methacrylate, anti-bubble and cross-linked are added to increase the quality of the prosthesis, which improves the quality of the made prosthesis

Tooth Color Acrylic (cold cure)

Self-curing acrylic powder is produced from high molecular weight Methyl Methacrylate in polymer chain structure and particle size below 60 microns. The primer and stabilizer are added to the powder composition and the catalyst is added to monomer composition to perform a chemical reaction between the powder and the liquid. The ratio of combination is 5 grams of monomer to 10 grams of powder

Pouring Acrylic

Pouring Acrylic powder is produced with base copolymer and Methyl Methacrylate polymer. This acrylic is injected into the flask in a low-viscosity form, so there are an organic stabilizer and cross-linked in the composition of this polymer. This product is produced in accordance with the ISO20795: 2013 standard and the quality of the prosthesis made of this material are much higher than press method

Beta Dent Acrylic products are known as Acrosun

All products can be provided in complete set or separately