Search
Close this search box.
Categories
Uncategorized

betarcs

Beta RCS:

Beta RCS sealer is a joint product of  Beta Dent and Terradent company and is produced and packaged under the license of this German company.

Supervision of product’s quality and packaging is done by Danesh Bonyan Atrak Baspar Fan Company.

Beta RCS sealer is a joint product of  Beta Dent and Terradent company and is produced and packaged under the license of this German company.

Supervision of product’s quality and packaging is done by Danesh Bonyan Atrak Baspar Fan Company.

This product has been compared to the American model AH26 and in some tests has shown better properties than AH26.

Hereby Beta Dent announces its readiness to cooperate with dental schools and researchers in reviewing the quality of the product and offers its product which is  superior than the American sample to the dental community with complete confidence .

This product has been compared to the American model AH26 and in some tests has shown better properties than AH26.

Root Canal Sealing and filling materials:

For root canal treatment, Gutta- Percha can’t fill the space of the root canal alone, so it is necessary to use sealing materials to fill the three-dimensional space of the root canal and attach the filling materials to the canal’s wall.

In general, a good quality sealer should be compatible with the tissue and have anti-bacterial properties, as well as non-toxic and Radio-opaque, completely fill the root canal and have dimensional stability and stick well to the canal’s wall

Technical features of the product:       

  • Permanent filler for tooth root canal
  • Can be used alone or in combination with Gutta- Percha
  • Silver free, based on resin
  • Desired Biocompatibility
  • Insolubility in histological examinations
  • Easiness of work and proper operating time
  • Optimal fluidity and caulk
  • Dimensional stability and no contraction during mechanical grip
  • Very favorable Radio-opacity

Product specifications:

8 grams of powder

10 grams of resin

Categories
Uncategorized

Terradent Dental Impression Materials

Terradent Dental Impression Materials:

Based on two-stage compression silicon (putty + light body)

Putty and light body are produced from the combination of Siloxane organic resin with fillers with micronized particle size along with stabilizing materials.

To harden the putty and light body, a catalyst with the recommended weight is added to the composition. Catalysts are made from organic materials with Carbon Oxide fillers, accelerators and cross-linked.

Attention: To achieve the desired result, use the complete set of Terradent and avoid combining materials with other brands.

Terradent Dental Impression Materials:

Application :

 Molding of all kind of bridges and all-ceramic crowns, orthodontic models, dental protector during prosthetic flasking.

 

Technical features of the product:

Record very detailed and precision dimensions

Hydrophilic

Proper timing for work

 Tear resistant

Higher elastic return

Has a pleasant taste and smell with organic essence (Mint)

Product specifications:

 Putty  : 910 miles

Light body : 140 miles

Catalyst : 60 miles

Categories
Uncategorized

acrosunacryl

acrylic

Beta Dent acrylics are always available in the market under the Acrosun brand

acrylic

Beta Dent acrylics are always available in the market under the Acrosun brand

Self-Cure Acrylic (Instant)

Self-curing acrylic powder is produced from high molecular weight Methyl Methacrylate in polymer chain structure and particle size below 60 microns. The primer and stabilizer are added to the powder composition and the catalyst is added to monomer composition to perform a chemical reaction between the powder and the liquid. The ratio of combination is 5 grams of monomer to 10 grams of powder

Tray Acrylic

Tray acrylic powder is based on Methyl Methacrylate polymer with combination of mineral materials and peroxide. The monomer has an additive of primer and organic oil to prevent more adhesion to the gypsum cast as well as ease during forming . Tray Acrylic is self-cure and use with the ratio of 5 grams of liquid to 10 grams of powder

Heat Cure Acrylic

The chemical structure of heat cure acrylic is based on Methyl Methacrylate polymer and is produced by adding peroxide and stabilizer to powder with a particle size of 10 to 100 microns. In the combination of Methyl Methacrylate, anti-bubble and cross-linked are added to increase the quality of the made prosthesis

Tooth Color Acrylic (heat cure)

The chemical structure of baked acrylic is based on methyl methacrylate polymer and is produced by adding peroxide and stabilizer to powder with a particle size of 10 to 100 microns. In the combination of methyl methacrylate, anti-bubble and cross-linked are added to increase the quality of the prosthesis, which improves the quality of the made prosthesis

Tooth Color Acrylic (cold cure)

Self-curing acrylic powder is produced from high molecular weight Methyl Methacrylate in polymer chain structure and particle size below 60 microns. The primer and stabilizer are added to the powder composition and the catalyst is added to monomer composition to perform a chemical reaction between the powder and the liquid. The ratio of combination is 5 grams of monomer to 10 grams of powder

Pouring Acrylic

Pouring Acrylic powder is produced with base copolymer and Methyl Methacrylate polymer. This acrylic is injected into the flask in a low-viscosity form, so there are an organic stabilizer and cross-linked in the composition of this polymer. This product is produced in accordance with the ISO20795: 2013 standard and the quality of the prosthesis made of this material are much higher than press method

Beta Dent Acrylic products are known as Acrosun

All products can be provided in complete set or separately

Categories
Uncategorized

denturesen

Beta Dent always offers the highest quality  best most popular product.

Finex

4 layers-5 cook, in the Enamel and Dentin layer which is made of Nano-hybrid materials, a combination of polyurethane resin with fine particle size and dense fillers, resistance to abrasion and color change, with a variety of size and color. At present, Finex is the highest quality product of Beta Dent Company, which has been welcomed by respected dentists and technicians for many years.

Emeral

It has 4 layers and 2 hard layers of composite material with resin base and silicate fillers, and in terms of hardness it is 2.3 to 3 times more resistant than teeth made of the basis of acrylic resin. Emeral has a very high brightness and gloss and with the presence of composite resin in Dentin and Enamel layers, it has the property of refracting light and has a very natural effect

Isosid

4 layers - 4 cook, Isosid artificial tooth is made of polymer reinforced with Cross- Linked monomer and a composition of organic fillers. Isosid has a long life against abrasion and tooth cusp has a hard material, so it is resistant to water absorption, discoloration and plaque deposit over time

Novin Vit

2 layers-3 cook, Novin Vit tooth has a polymer structure and the properties of the polymer are strengthened by adding a curing step during polymerization. To improve the chemical properties of the teeth as well as to improve the quality of the polymer, Cross Linked additives and stabilizers are combined with the polymer base formula

Cristal

3 Layers- 3cook, crystal are synthesized from minerals and produced uniformly with a particle size of 1 to 20 microns by combining organic solvents at very high pressures and temperatures. The tooth base is made of Poly Methyl Methacrylate and has a very good connection for strong bonding to the gingival denture. The crystal is resistant to plaque deposit and has high color stability

ECL

3-layer teeth and all layers are made of Poly Methyl Methacrylate. The particle size of Poly Methyl Methacrylate is reinforced with cross-linked TEGDMA. One of the prominent features of teeth based on polymer Poly Methyl Methacrylate is the resistance of this type of teeth to discoloration and plaque deposit and this company uses Cross Linked to increase the wear resistance of this type of tooth

Beta Star

2 Layers-2 cook, Beta Star teeth are produced with acrylic polymer base. It has a variety of sizes and colors and is produced in accordance with the international standard ISO 3336. It has good properties such as good polishing and strong connection to the gingival denture. It has a very high resistance to discoloration in long-term use

At a glance

Beta Dent is a manufacturer of various sizes of Artificial Teeth

All our products are offered in complete sets and 8 setsAll our products are offered in complete sets and 8 sets